Industrial automation and control

We design and integrate the plant's control layer: from system architecture and PLC programming to the SCADA your operators use every shift. We work on Allen Bradley and Siemens platforms, and connect the process to MIOBOX when the operation needs its indicators in real time.

What it covers

Control architecture

We define system topology —controllers, remote I/O, networks and network levels— before writing a single line of code, so the solution supports the plant as it grows instead of constraining it.

PLC and HMI/SCADA programming

We program Allen Bradley (ControlLogix, CompactLogix) and Siemens (S7-1500, TIA Portal) controllers, with operator interfaces in FactoryTalk View, WinCC and InTouch.

Legacy controller migration

We replace out-of-support platforms while preserving proven process logic, using cutover strategies that shorten the shutdown window.

Batch control and MES/MOM

We structure recipes, phases and batch traceability for batch processes, and integrate the control layer with manufacturing management systems.

Industrial networking

Segmentation and tuning of EtherNet/IP, Profinet and Modbus networks, with industrial-grade managed switches.

FAT/SAT commissioning

Factory and site acceptance testing against documented protocols, start-up support and knowledge transfer to your maintenance team.

What you receive

Commented controller program, with a backup handed over to the client
HMI/SCADA application with its operating screens and alarms
Electrical and network drawings updated as-built
Signed FAT and SAT protocols
Training for operations and maintenance personnel

Case studies in this line

Work delivered on the plant floor within this service.

Industrial

Modernization of Extruder 27 Control

Modernization of extruder 27 control with Siemens S7-1500 PLC, distributed I/O ET200SP, and HMI, recovering reliability and production.

Industrial

SCADA Migration to Siemens Platform

Migration of the InTouch SCADA, running on a damaged panel PC, to a new Siemens supervisory platform, restoring system operability.

Industrial

Technological Upgrade of the Cutter Control

Technological upgrade of the cutter control after controller failures, with new controller, HMI, and control logic adapted to the machine.

Food

Rockwell Control System for Sand Filters

New Rockwell control system for sand filters, with installation under RETIE standard, eliminating process information losses.

Pharmaceutical

Migration of the Encapsulating Machine Control

Migration of the encapsulating machine's control system to Rockwell technology, restoring process availability and reliability.

Cement

Migration to E300 Intelligent Relays and SCADA Update

Migration from E1 Plus (discontinued) relays to E300 intelligent relays and plant SCADA update, enhancing reliability and real-time monitoring.

Oil & Gas

Control System for LACT Dispatch Unit

Allen Bradley controller (Ecopetrol Vendor List) that integrates LACT unit and Master Station signals to the plant BPCS, suitable for Oil & Gas.

Frequently asked questions

Can you migrate a legacy control system without a full production stop?

In most cases, yes. We build and test the new panel and program off-line, and reserve the cutover for an agreed shutdown window —typically scheduled maintenance or a weekend. The process logic that already works is preserved; what changes is the platform running it.

Do you work with both Allen Bradley and Siemens?

Both. We are a Rockwell Automation Bronze System Integrator and we also develop on Siemens S7-1500 and TIA Portal. The platform is chosen based on what the plant already runs and the support available, not on the integrator’s preference.

Does the client keep the PLC code?

Yes. We hand over the commented program and its backup, along with updated drawings. A plant must be able to maintain its own system without depending on whoever installed it.

Other service lines

Have a project like this?

Tell us what you need to solve and we will come back with a clear route for your plant.

Get a quote