Instrument selection
We choose the measuring principle, range and materials based on actual process conditions —temperature, pressure, fluid aggressiveness and area classification— rather than on whichever catalogue is closest to hand.
A control system can never be better than the measurement feeding it. We select, install and tune field instrumentation, and design the control loops that turn that measurement into stable action on the process.
We choose the measuring principle, range and materials based on actual process conditions —temperature, pressure, fluid aggressiveness and area classification— rather than on whichever catalogue is closest to hand.
We define the control strategy, loop tuning and protections, so the process responds without oscillating or saturating the final element.
Installation and tuning of temperature, pressure, flow, level and humidity transmitters, including wiring, signal conditioning and point-to-point verification.
Verification and traceability of critical measurements, so the data behind process decisions can be defended.
We bring the field signal into the PLC and SCADA, with scaling, filtering and alarms consistent with how the plant actually operates.
Work delivered on the plant floor within this service.
Drying system control upgrade with real-time monitoring, recovering traceability of process variables, under RETIE standard.
Allen Bradley controller (Ecopetrol Vendor List) that integrates LACT unit and Master Station signals to the plant BPCS, suitable for Oil & Gas.
Integrated energy manager for the Cartagena plant, with MCC upgraded to Rockwell, industrial Ethernet network, and expansion of the MIOBOX platform.
We start from actual operating conditions: fluid, range, temperature, pressure, accuracy requirements and area classification. That set rules out most options before brand or price enters the conversation. Because we are a multi-brand distributor, our recommendation is not tied to a single manufacturer.
Yes. We can stay in the field —selection, installation, wiring and tuning— and integrate with the control logic the plant already runs. When a loop does require program changes, we flag it before starting.
Verification that each critical measurement is traceable and within tolerance, with its corresponding record. That is what lets you defend a process decision —or an audit— with evidence rather than an isolated reading.
Tell us what you need to solve and we will come back with a clear route for your plant.
Get a quote